Skip to main content
ElectraCore
LearnCalculatorsCircuit DesignerReferences
Saved
Educational use: ElectraCore supports learning and preliminary checks. It does not replace a competent electrician or engineer. Verify results, equipment data, and current local regulations before installation or live work.
Courses/Solar PV & Renewables/System Design & Sizing

exercise · 11min · Lesson 10 of 29

System sizing design exercise

Complete the exercise before marking this lesson complete.

Course syllabusCourse overview
01PV Physics & Panel Technology
  1. ReadPhotovoltaic effect: how a cell works
  2. ReadMonocrystalline vs polycrystalline vs thin-film
  3. ReadPanel specifications: Voc, Vmp, Isc, Imp
  4. ReadTemperature and irradiance effects
  5. quizPV physics quiz
02System Design & Sizing
  1. ReadSite survey: roof orientation, shading, pitch
  2. ReadString sizing: voltage and current matching
  3. ReadSeries vs parallel string configurations
  4. ReadYield estimation: kWh/kWp calculations
  5. exerciseSystem sizing design exercise
03Inverters
  1. ReadString inverters: topology and MPPT
  2. ReadMicroinverters and power optimisers
  3. ReadHybrid inverters for battery systems
  4. ReadInverter selection criteria
  5. quizInverter quiz
04Battery Storage
  1. ReadBattery chemistries: LFP vs NMC
  2. ReadBattery sizing for self-consumption
  3. ReadAC vs DC coupled systems
  4. ReadBattery safety and installation requirements
  5. exerciseBattery sizing exercise
05Grid Connection
  1. ReadG98: systems up to 3.68kW per phase
  2. ReadG99: larger systems, DNO approval
  3. ReadExport limitation and smart export tariffs
  4. ReadGeneration and export metering
  5. quizGrid connection quiz
06Installation & Commissioning
  1. ReadRoof mounting systems: rail and clamp
  2. ReadDC cable sizing and routing
  3. ReadCommissioning and functional testing
  4. quizFinal assessment
Exercise · 11min
Problem

A supplied module has Pmp=430 W, corrected cold Voc=54.9 V and corrected hot Vmp=35.2 V. The inverter maximum is 600 V, MPPT minimum is 250 V, and input current permits one 10.5 A string per MPPT. Find the feasible integer string range and nominal DC power for a 10-module string.

Personal study record

Lesson notes

Ready

Notes are stored on this device unless you export them.