Skip to main content
ElectraCore
LearnCalculatorsCircuit DesignerReferences
Saved
Educational use: ElectraCore supports learning and preliminary checks. It does not replace a competent electrician or engineer. Verify results, equipment data, and current local regulations before installation or live work.
Courses/Industrial Control & PLCs/Control Circuit Diagrams

exercise · 5min · Lesson 15 of 30

Diagram reading exercises

Complete the exercise before marking this lesson complete.

Course syllabusCourse overview
01Motor Starters
  1. ReadDOL starter: main and control circuit
  2. ReadStar-delta starter: wiring and timer
  3. ReadSoft starters: operation and parameters
  4. ReadVariable speed drives: inverter drives
  5. quizMotor starter quiz
02Contactors & Overloads
  1. ReadContactor construction and ratings
  2. ReadAuxiliary contacts and interlocking
  3. ReadThermal overload relays: setting the dial
  4. ReadElectronic overloads and motor protection relays
  5. exerciseContactor circuit problems
03Control Circuit Diagrams
  1. ReadIEC 60617 symbols: reading control diagrams
  2. ReadLadder diagrams: European and American styles
  3. ReadDrawing a full DOL control circuit
  4. ReadForward-reverse motor control
  5. exerciseDiagram reading exercises
04Safety Systems
  1. ReadEmergency stop requirements: IEC 60204
  2. ReadSafety relays and safety PLCs
  3. ReadLight curtains and safety interlocks
  4. ReadSafe isolation: EAWR and multi-energy control
  5. quizSafety systems quiz
05PLC Fundamentals
  1. ReadWhat is a PLC and where is it used?
  2. ReadPLC architecture: CPU, I/O modules, power
  3. ReadLadder logic basics: contacts and coils
  4. ReadTimers and counters in ladder logic
  5. exerciseWriting a simple motor control program
06Panel Layout & Installation
  1. ReadPanel design: layout and component spacing
  2. ReadCable management inside panels
  3. ReadLabelling, ferrules, and documentation
  4. ReadPanel testing and commissioning checklist
  5. quizFinal assessment
Exercise · 5min
Problem

A forward/reverse drawing has electrical cross-interlocks, but no mechanical interlock. Its PLC can request both directions, and reverse is permitted immediately after forward drops. Review the design.

Personal study record

Lesson notes

Ready

Notes are stored on this device unless you export them.